EP 2000
Kategori :
Behringer
|
Yazdırın
BEHRINGER EUROPOWER EP2000 2x750 watt Power Amplifikatör 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode) Precise Power, Signal and Clip LEDs to monitor performance XLR and 1/4" TRS input connectors for compatibility with any source Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems Selectable low-frequency filters SELECT 30 Hz or 50 Hz) remove distracting infra-sound frequencies Independent limiters per channel offer reliable protection against overload and distortion High-current toroidal transformer for ultra-high transient response and absolute reliability Ultra-reliable Toshiba/Fairchild power transistors Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show "Back-to-front" ventilation system including air filter for reliable operation "Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis - Output Power:
- 20Hz-20kHz @ 0.1% THD, both channels driven:
- 8 ohms per channel - 350W
- 4 ohms per channel - 500W
- 2 ohms per channel - 650W
RMS @ 1% THD (sine wave UNION ALL bridged mode: - 8 ohms - 1000W
- 4 ohms - 1300W
Peak power, both channels driven: - 8 ohms per channel - 400W
- 4 ohms per channel - 750W
- 2 ohms per channel - 1000W
Peak power, bridged mode: - 8 ohms - 1500W
- 4 ohms - 2000W
Distortion: <0.01%
Frequency Response: - At 10 dB below rated output power - 20Hz-20kHz,
- At -3 dB points - 5Hz-50kHz
Damping Factor: >300 at 8 ohms - Noise: -100 dB unweighted, 20Hz-20kHz
- Voltage Gain: 40X SELECT 32dB)
- Input sensitivity: 1.15V (+3.4 dBu) VRMS at 8 ohms
- Input impedance: 10kOhm unbalanced, 20kOhm balanced
Controls: - Front: Power switch, gain control (channels 1 and 2)
- Rear: DIP switches SELECT 10x)
Indicators: - Power: Green LED
- Clip: Red LED, 1 per channel
- Signal: Yellow LED, 1 per channel
Inputs: Balanced XLR and 1/4" TRS connectors - Outputs: Touch-proof binding posts and professional speaker connectors
Cooling: Continuously variable-speed fan, back-to-front airflow - Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
- Load Protection: Turn on/off muting, AC coupling
- Circuit Type: Class AB complementary linear output
Power Supply: - Mains Voltage/Breaker: 100-120V~, 50/60Hz15A
- Power Consumption: 1600W
Dimensions: 19" W x 3-1/2" H x 15-4/5" D - Weight: 35 lb.
|